"_C'0.S.M,0'S." <who@now.com> wrote in
news:51b79ae0$0$2809$c3e8da3$9b4ff22a@news.astraweb.com:
> Dianthus <fan@libera.net> wrote in
> news:XnsA1DCE58F781FBhorticult2000yahooco@91.223.220.11:
>
>> "_C'0.S.M,0'S." <who@now.com> wrote in
>> news:51b62b36$0$7381$c3e8da3$e408f015@news.astraweb.com:
>>
>> Hi Cosmos, I always used to open your posts first with yenc, that
>> gives me files to join with master splitter which gives me a winrar
>> file to open. Only this time yenc did not work, but said no encoding
>> found. So without yenc I cannot put the part files together. The
>> question is now what programm to start with to process your post??
>> Thanks, Dianthus.
>>
>>
>>
>>> Dianthus <fan@libera.net> wrote in
>>> news:XnsA1DACDB808925horticult2000yahooco@91.223.220.11:
>>>
>>>> "_C'0.S.M,0'S." <who@now.com> wrote in
>>>> news:51b39b22$0$58283$c3e8da3 $88b277c5@news.astraweb.com:
>>>>
>>>>> andrei200000
>>>>
>>>> It does not decode with Yenc. What do I do now????
>>>> Dianthus
>>>
>>> Hi Dianthus
>>>
>>> Not entirely certain what you mean by "It does not decode with Yenc"
>>>
>>>
>>> Do you mean the rar does not combine with winrar?
>>> Do you mean the parts do not repair with Quick par ?
>>> I am not even sure that Yenc was in fact the encoding I used to send
>>> the parts
>>> It would be the encoding I hoped to use but needs to be selected in
>>> Xnews
>>>
>>> Does your Xnews reader show the headers as intact/complete on your
>>> server before you d/l them ?
>>>
>>> Cosmos
>>>
>>
>>
> Hi Dianthus
>
> Well! as yenc tells you, the post was not apparently encoded using
> that encoding compression, and was accidentally the older
> conventional mime encoding.
>
> This really should not give you any problem, just use Xnews to d/l
> the parts as normal to a folder ( xnews decodes them as the parts are
> D/L) and combine them with master splitter back into the single rar
> file, a better way to re combine them would be to use a programme
> called quickpar, http://www.quickpar.org.uk/
>
> once installed just double click on one of the par files at the end of
> the post when you have them all d/loaded into the folder and they will
> be repaired / combined
>
>
> Cosmos
>
>
Hello Cosmos, Sorry, it does not work that simple. Master splitter does
not have the 000 file and aborts the operation and Quickpar opens a
window that asks a file name, which I do not have or opens as a textfile.
Usually Yenc avoids all these problems. Please next time post as you were
doing before.
Dianthus
|
| Follow-ups: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
|