| 
 | Path: news.nzbot.com!not-for-mail NNTP-Posting-Date: Wed, 01 Nov 2017 10:40:43 -0500
 From: a@b.com
 Newsgroups: alt.binaries.tvshows
 Subject: Re: ping pcz.
 X-Newsreader: NewsLeecher v7.0 Final (http://www.newsleecher.com)
 References: <Nb%JB.78828$YH1.34551@fx18.am4>
 Message-ID: <nc6dnVlWt9Fmd2TEnZ2dnUU7-T-dnZ2d@giganews.com>
 Date: Wed, 01 Nov 2017 10:40:43 -0500
 Lines: 106
 X-Usenet-Provider: http://www.giganews.com
 X-Trace: sv3-m5jWLHbXh2pCWba0is1Gyzn2IxpK8qT0BCqGghd4wc7OrguUcoZ0dWdhKSCCQSJrtYdBdjT22tGjEfN!Qi0e5YpXjEwd9R159+0mJCLT7tXnhnJ9DU85EU42sWd6UlqNCoGBfq6hUtBfLHGrxYJ/j27qAPNW
 X-Complaints-To: abuse@giganews.com
 X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
 X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
 X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
 X-Postfilter: 1.3.40
 X-Original-Bytes: 4696
 X-Received-Bytes: 4787
 X-Received-Body-CRC: 3511230253
 Xref: news.nzbot.com alt.binaries.tvshows:3870
 
 In reply to "**PCZ**" who wrote the following:
 
 > In reply to "a@b.com" who wrote the following:
 >
 > > In reply to "**PCZ**" who wrote the following:
 > >
 > > > In reply to "a@b.com" who wrote the following:
 > > >
 > > > > <...>
 > > > >
 > > > > > Just spotted your post.
 > > > > > I use a few apps dependent on what i want to do.
 > > > >
 > > > > > You can use Handbrake or one of the re skinned clones.
 > > > > > However i would say this isn't your best choice for doing a whole
 > > > > > season.
 > > > > > I use it for one offs and small batches.
 > > > > > It lacks 10bit support in the standard versions, can be enabled by
 > > > > > downloading
 > > > > > nightlys and adding DLLs.
 > > > >
 > > > > > I would download StaxRip-x64
 > > > > > It is free.
 > > > >
 > > > > > You will be encoding on the CPU i guess.
 > > > > > It is a slow process be warned.
 > > > >
 > > > > > I can give you the settings i use and maybe a preset but it is pretty
 > > > > > > much
 > > > > > defaults in the x265 profile anyways.
 > > > >
 > > > > > install StaxRip-x64
 > > > > > Get the episodes you want to encode in a folder of there own.
 > > > >
 > > > > > respond and i will continue with settings and maybe a picture.
 > > > >
 > > > > i've a gtx 1060, so if that would be better for re encoding, i've no
 > > > > problem
 > > > > with using it. i'd like to get the best quality i can from the 1080 rips
 > > > > i
 > > > > dled.
 > > > > otherwise, what is the point in bothering to re encode and decrease the
 > > > > file
 > > > > size?
 > > > >
 > > > > i've not had the chance to remove the audio from those films for my
 > > > > daughter
 > > > > yet. i've not tracked down which hdd they are on. i have lots of hdds
 > > > > full
 > > > > of
 > > > > stuff. i've tried to keep all the childrens stuff on 2 or 3.
 > > > >
 > > > > i did find an emply 2tb hdd i can put in a pc that just needs a hdd to
 > > > > be
 > > > > operational again.
 > > > >
 > > > > --
 > > >
 > > > You can use the 1060.
 > > > However encoding with NVEnc is lower quality than CPU encoding.
 > > > Fast yes but not a patch on encodes done on the CPU.
 > > > If you up the bitrate some it gets better.
 > > >
 > > > I have a 1080 which i use for encoding tests.
 > > >
 > > > Here is a good page to tell you how to use your VC.
 > > > http://aerobytepc.com/index-html/nvidia-hardware-encoding/
 > > > http://aerobytepc.com/index-html/encoding-with-staxrip-64/
 > >
 > > after i finnish the daily dl's for everyone i'll be off to check it out.
 > >
 > > i'll be doing cpu encoding, after all, what is the point of having a good i7
 > > unless i use it to it fullest capacity?
 > >
 > > > --
 > > > ----------------------------------------- --- -- -
 > > > Posted with NewsLeecher v7.0 Final
 > > > Free Newsreader @ http://www.newsleecher.com/
 > > > ------------------------------- ----- ---- -- -
 > Well it takes a while for each episode to encode.
 > Stax rip does the audio first then the video encode.
 >
 > It converts 5.1 to AAC 5.1.
 > so leave the AAC VBR as default.
 >
 > I usually set second audio to none for x265 to keep the file size down.
 > It should pickup the subs OK if you have any.
 
 i've enough room to do the reencoding now, first i have to get rid of this awful
 headache before i do a couple of tests to see what results i get.
 
 > --
 > ----------------------------------------- --- -- -
 > Posted with NewsLeecher v7.0 Final
 > Free Newsreader @ http://www.newsleecher.com/
 > ------------------------------- ----- ---- -- -
 
 
 
 
 --
 ----------------------------------------- --- -- -
 Posted with NewsLeecher v7.0 Final
 Free Newsreader @ http://www.newsleecher.com/
 ------------------------------- ----- ---- -- -
 
 
 | 
 
 |