Path: news.nzbot.com!not-for-mail
NNTP-Posting-Date: Tue, 31 Oct 2017 07:51:51 -0500
From: a@b.com
Newsgroups: alt.binaries.tvshows
Subject: Re: ping pcz.
X-Newsreader: NewsLeecher v7.0 Final (http://www.newsleecher.com)
References: <HfJJB.88715$ts1.73645@fx12.am4>
Message-ID: <6sidnWoZr9d67GXEnZ2dnUU7-UmdnZ2d@giganews.com>
Date: Tue, 31 Oct 2017 07:51:51 -0500
Lines: 78
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-q11TlZbyPEfwkY1LH+NctDHEvNUC6LVs5pSnJRiB4Z+46oiiyAh1gNu7bCe+1MyWKLhLwZCYmlqOlAV!5P/peawegWt+VHvYiZNCvF8Kl9wG/Xd4ilCIioaWzSUYf/yNXpPewdyW+3B5FLQrwUlSSi/FOYqa
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
X-Original-Bytes: 3594
X-Received-Bytes: 3685
X-Received-Body-CRC: 1949598079
Xref: news.nzbot.com alt.binaries.tvshows:3864
In reply to "**PCZ**" who wrote the following:
> In reply to "a@b.com" who wrote the following:
>
> > <...>
> >
> > > Just spotted your post.
> > > I use a few apps dependent on what i want to do.
> >
> > > You can use Handbrake or one of the re skinned clones.
> > > However i would say this isn't your best choice for doing a whole season.
> > > I use it for one offs and small batches.
> > > It lacks 10bit support in the standard versions, can be enabled by
> > > downloading
> > > nightlys and adding DLLs.
> >
> > > I would download StaxRip-x64
> > > It is free.
> >
> > > You will be encoding on the CPU i guess.
> > > It is a slow process be warned.
> >
> > > I can give you the settings i use and maybe a preset but it is pretty
> > > >much
> > > defaults in the x265 profile anyways.
> >
> > > install StaxRip-x64
> > > Get the episodes you want to encode in a folder of there own.
> >
> > > respond and i will continue with settings and maybe a picture.
> >
> > i've a gtx 1060, so if that would be better for re encoding, i've no problem
> > with using it. i'd like to get the best quality i can from the 1080 rips i
> > dled.
> > otherwise, what is the point in bothering to re encode and decrease the file
> > size?
> >
> > i've not had the chance to remove the audio from those films for my daughter
> > yet. i've not tracked down which hdd they are on. i have lots of hdds full
> > of
> > stuff. i've tried to keep all the childrens stuff on 2 or 3.
> >
> > i did find an emply 2tb hdd i can put in a pc that just needs a hdd to be
> > operational again.
> >
> > --
>
> You can use the 1060.
> However encoding with NVEnc is lower quality than CPU encoding.
> Fast yes but not a patch on encodes done on the CPU.
> If you up the bitrate some it gets better.
>
> I have a 1080 which i use for encoding tests.
>
> Here is a good page to tell you how to use your VC.
> http://aerobytepc.com/index-html/nvidia-hardware-encoding/
> http://aerobytepc.com/index-html/encoding-with-staxrip-64/
after i finnish the daily dl's for everyone i'll be off to check it out.
i'll be doing cpu encoding, after all, what is the point of having a good i7
unless i use it to it fullest capacity?
> --
> ----------------------------------------- --- -- -
> Posted with NewsLeecher v7.0 Final
> Free Newsreader @ http://www.newsleecher.com/
> ------------------------------- ----- ---- -- -
--
----------------------------------------- --- -- -
Posted with NewsLeecher v7.0 Final
Free Newsreader @ http://www.newsleecher.com/
------------------------------- ----- ---- -- -
|
|