SSTG <stay@large.far> wrote in news:XnsA491F13ABAB2staylargefar@
207.246.207.121:
> yum@blah.com wrote in news:b2kikat7a9lcehnpoj37us3v7l4ousmhi6@4ax.com:
>
>> On 05 May 2015 06:51:18 GMT, SSTG <stay@large.far> wrote:
>>
>>>Yum <yum@blah.com> wrote in news:fhfn19tlmf9paq81k9racmbahbmgs3kjjs@
>>>4ax.com:
>>>
>>>> On Mon, 22 Jul 2013 20:37:18 -0400, Manny <mg@airrent.net> wrote:
>>>>
>>>>>On Mon, 22 Jul 2013 19:05:49 -0500, Spritle <yeathatspritle@home>
>>>>>wrote:
>>>>>
>>>>>>On Mon, 22 Jul 2013 19:31:16 -0400, Manny <mg@airrent.net> wrote:
>>>>>>
>>>>>>>On Mon, 22 Jul 2013 16:56:31 -0500, Yum <yum@blah.com> wrote:
>>>>>>>
>>>>>>>>On Mon, 22 Jul 2013 14:56:40 +0000 (UTC), mg@airrent.net (Manny)
>>>>>>>>wrote:
>>>>>>>>
>>>>>>>>I got it, installed it following these instructions.
>>>>>>>>1. Make sure Powerpost is installed and functional!
>>>>>>>>2. Make sure there's no other SSL tunnel installed on your system
> to
>>>>>>>>avoid a conflict!
>>>>>>>>3. Make sure Powerpost is not running during the setup of this
> add-
>>>on!
>>>>>>>>
>>>>>>>>I am using port 563 and with a login and pw, but get a can't
> connect
>>>>>>>>to server.
>>>>>>>>Got any suggestions?
>>>>>>>
>>>>>>>When you start CamelPowerPost, click on the options button.
>>>>>>>
>>>>>>>The server address needs to be: 127.0.0.1 and the port stays at
> 119
>>>>>>>not 563.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>Make sure the SSL add- on is already running. That's why I
> installed
>>>>>>>it to automatically load when I boot my machine so it's always
>>>>>>>running.
>>>>>>
>>>>>>Why 127.0.0.1, and not news.giganews.com? I thought 119 was the
>>>>>>standard port, and 563 was the ssl port. I'll give it a go, but I'm
>>>>>>confused. Thank you for your help.
>>>>>
>>>>>PowerPost has to pass the data to stunnel the ssl add-on so it does
> it
>>>>>by looping it back to stunnel using the loopback 127.0.0.1 port 119.
>>>>>
>>>>>In the stunnel folder there is a configuration file called
>>>>>stunnel.conf. That's where you plug in the news server & port 563.
>>>>>
>>>>>It looks like this:
>>>>>
>>>>>
>>>>>; stunnel configuration file for Camelsystem Power-Post
>>>>>
>>>>>cert = stunnel.pem
>>>>>
>>>>>; Some performance tunings
>>>>>
>>>>>socket = l:TCP_NODELAY=1
>>>>>socket = r:TCP_NODELAY=1
>>>>>
>>>>>; Use it for client mode
>>>>>
>>>>>client = yes
>>>>>
>>>>>; Service-level configuration
>>>>>
>>>>>[pop3s]
>>>>>accept = 995
>>>>>connect = 110
>>>>>
>>>>>[imaps]
>>>>>accept = 993
>>>>>connect = 143
>>>>>
>>>>>[ssmtp]
>>>>>accept = 465
>>>>>connect = 25
>>>>>
>>>>>[NNTP]
>>>>>accept=119
>>>>>connect=news.altopia.com:563 <---- change this to your newsserver
>>>>>
>>>>>address
>>>>>
>>>>>
>>>>>
>>>>>Now you can also do the same thing using any version of PowerPost
>>>>>simply by changing the address in the PowerPost program to 127.0.0.1
>>>>>port 119.
>>>>>
>>>> Manny,
>>>> I have followed your instructions to the t, and cannot get the
bugger
>>>> to work. I'm using Camelsystems powerpost ver. 2.4 and the add on
> that
>>>> you posted. I get this error message from powerpost - Error
recieving
>>>> post acknowledgement from server.
>>>> Yum
>>>
>>>Could someone please repost the program, I somehow lost it.
>>>Thanks
>> I posted the program, but here's the link to a review of the uploader
>> that has working download links.
>> http://usenetreviewz.com/easyusenet-uploader/
>> Cheers,
>> Yum
>>
> Thanks but this is not the same thing.
> Last time you posted stunnel and it worked great with Xnews once I
> figured out how to set it up.
>
Nevermind, I found it!
|
|