Yum <yum@blah.com> wrote in news:fhfn19tlmf9paq81k9racmbahbmgs3kjjs@
4ax.com:
> On Mon, 22 Jul 2013 20:37:18 -0400, Manny <mg@airrent.net> wrote:
>
>>On Mon, 22 Jul 2013 19:05:49 -0500, Spritle <yeathatspritle@home>
>>wrote:
>>
>>>On Mon, 22 Jul 2013 19:31:16 -0400, Manny <mg@airrent.net> wrote:
>>>
>>>>On Mon, 22 Jul 2013 16:56:31 -0500, Yum <yum@blah.com> wrote:
>>>>
>>>>>On Mon, 22 Jul 2013 14:56:40 +0000 (UTC), mg@airrent.net (Manny)
>>>>>wrote:
>>>>>
>>>>>I got it, installed it following these instructions.
>>>>>1. Make sure Powerpost is installed and functional!
>>>>>2. Make sure there's no other SSL tunnel installed on your system to
>>>>>avoid a conflict!
>>>>>3. Make sure Powerpost is not running during the setup of this add-
on!
>>>>>
>>>>>I am using port 563 and with a login and pw, but get a can't connect
>>>>>to server.
>>>>>Got any suggestions?
>>>>
>>>>When you start CamelPowerPost, click on the options button.
>>>>
>>>>The server address needs to be: 127.0.0.1 and the port stays at 119
>>>>not 563.
>>>>
>>>>
>>>>
>>>>Make sure the SSL add- on is already running. That's why I installed
>>>>it to automatically load when I boot my machine so it's always
>>>>running.
>>>
>>>Why 127.0.0.1, and not news.giganews.com? I thought 119 was the
>>>standard port, and 563 was the ssl port. I'll give it a go, but I'm
>>>confused. Thank you for your help.
>>
>>PowerPost has to pass the data to stunnel the ssl add-on so it does it
>>by looping it back to stunnel using the loopback 127.0.0.1 port 119.
>>
>>In the stunnel folder there is a configuration file called
>>stunnel.conf. That's where you plug in the news server & port 563.
>>
>>It looks like this:
>>
>>
>>; stunnel configuration file for Camelsystem Power-Post
>>
>>cert = stunnel.pem
>>
>>; Some performance tunings
>>
>>socket = l:TCP_NODELAY=1
>>socket = r:TCP_NODELAY=1
>>
>>; Use it for client mode
>>
>>client = yes
>>
>>; Service-level configuration
>>
>>[pop3s]
>>accept = 995
>>connect = 110
>>
>>[imaps]
>>accept = 993
>>connect = 143
>>
>>[ssmtp]
>>accept = 465
>>connect = 25
>>
>>[NNTP]
>>accept=119
>>connect=news.altopia.com:563 <---- change this to your newsserver
>>
>>address
>>
>>
>>
>>Now you can also do the same thing using any version of PowerPost
>>simply by changing the address in the PowerPost program to 127.0.0.1
>>port 119.
>>
> Manny,
> I have followed your instructions to the t, and cannot get the bugger
> to work. I'm using Camelsystems powerpost ver. 2.4 and the add on that
> you posted. I get this error message from powerpost - Error recieving
> post acknowledgement from server.
> Yum
Could someone please repost the program, I somehow lost it.
Thanks
|
|