| 
 | Path: news.nzbot.com!not-for-mail From: Miloch <Miloch_member@newsguy.com>
 Newsgroups: alt.binaries.pictures.aviation
 Subject: Bristol Brabazon
 Date: 7 Aug 2017 06:48:13 -0700
 Organization: NewsGuy - Unlimited Usenet $23.95
 Lines: 114
 Message-ID: <om9r2t0jjo@drn.newsguy.com>
 NNTP-Posting-Host: p7d6c1c87ac3fa982b3274154c9d807d39e7a4c8866cd2ed2.newsdawg.com
 User-Agent: Direct Read News 5.60
 X-Received-Bytes: 5591
 X-Received-Body-CRC: 1727165488
 Xref: news.nzbot.com alt.binaries.pictures.aviation:6340
 
 https://en.wikipedia.org/wiki/Bristol_Brabazon
 
 The Bristol Type 167 Brabazon was a large propeller-driven airliner which was
 designed by the Bristol Aeroplane Company to fly transatlantic routes between
 the United Kingdom and the United States. The type was named Brabazon after the
 Brabazon Committee and its chairman, Lord Brabazon of Tara, who had developed
 the specification for which the airliner had been designed.
 
 While Bristol had studied the prospects of developing very large aircraft as
 bomber aircraft prior to and during the Second World War, it was the release of
 a report compiled by the Brabazon Committee which had led to the company to
 adapting its larger bomber proposal into a prospective large civil airliner to
 meet the Type I specification for a very large airliner for the long distance
 transatlantic route. Initially designated as the Type 167, the proposed aircraft
 was furnished with a huge 25 ft (8 m)-diameter fuselage containing full upper
 and lower decks on which passengers would be seated in luxurious conditions; it
 was powered by an arrangement of eight Bristol Centaurus radial engines which
 drove a total of eight paired contra-rotating propellers set on four
 forward-facing nacelles.
 
 Bristol decided to submit the Type 167 proposal to meet Air Ministry
 Specification 2/44; following a brief evaluation period, a contract to built a
 pair of prototypes was awarded to Bristol. At the time of its construction, the
 Brabazon was amongst of the largest aircraft in the world to have ever been
 built, being sized roughly between the much later Airbus A300 and Boeing 767
 airliners. Despite its vast size, the Brabazon was designed to carry a total of
 only 100 passengers, each one being allocated their own spacious area about the
 size of the entire interior of a small car. On 4 September 1949, the first
 prototype conducted its maiden flight. In addition to participating in a flight
 test programme in support to intended production aircraft, the prototype made
 high-profile public flying displays at the 1950 Farnborough Airshow, Heathrow
 Airport, and the 1951 Paris Air Show.
 
 However, the Brabazon was unable to attract any firm commitments for the type
 due a widespread feeling amongst airlines that the airliner was too large and
 expensive to be practical and applicable to their existing operations. Being
 unable to attract any orders, the aircraft became regarded as a commercial
 failure. On 17 July 1953, Duncan Sandys, the Minister of Supply, announced that
 the Brabazon had been cancelled due to a lack of military or civil orders for
 the type. In the end, only the single prototype was flown; it was broken up in
 1953 for scrap, along with the uncompleted turboprop-powered Brabazon I Mk.II.
 
 
 Role
 Airliner
 
 Manufacturer
 Bristol Aeroplane Company
 
 First flight
 4 September 1949
 
 Retired
 1953
 
 Status
 Only example scrapped in 1953
 
 Number built
 1
 
 Although considered a failure and a white elephant, the record of the Brabazon
 is not entirely unfavourable. At least half of the large sums spent on the
 
 million for new large hangars and an extended runway at Filton. These
 improvements meant that Bristol was in an excellent position to continue
 production of other designs; the assembly hall was soon being used for building
 another transatlantic aircraft, the Britannia. In addition, many of the
 techniques which had developed during the Brabazon project were applicable to
 any aircraft and thus could be reused, not just airliners.
 
 Bristol had also been awarded the contract for the Type III aircraft, for which
 they delivered as the Britannia. By making use of the advances made during the
 development of the Brabazon, Bristol were able to design the Britannia to
 possess the best payload fraction of any aircraft up to that time, and it held
 that record for a number of years. Although the Britannia was delayed after
 problems with the separate Type IV, the jet-powered de Havilland Comet, it went
 on to be a workhorse for many airlines into the 1970s.
 
 Specifications (Mark I)
 
 General characteristics
 
 Capacity: 100 passengers
 Length: 177 ft (54.0 m)
 Wingspan: 230 ft (70 m)
 Height: 50 ft (15 m)
 
 Airfoil: Root T.P.4 (mod) Tip T.P.5
 Empty weight: 145,100 lb (65,820 kg)
 Max. takeoff weight: 290,000 lb (130,000 kg)
 Fuel capacity 13,650 Imp gal (61,971 L)
 
 Propellers: paired contra-rotating Rotol, three wooden blades Propeller
 diameter: 16 ft (4.9 m)
 
 
 Performance
 Maximum speed: 300 mph (260 kn, 480 km/h) at 25,000 ft
 Cruise speed: 250 mph (220 kn, 400 km/h) at 25,000 ft
 Range: 5,500 mi (4,800 nmi, 8,900 km) at 250 mph and 25,000 ft
 Service ceiling: 25,000 ft (7,600 m) at full weight
 Rate of climb: 750 ft/min (3.8 m/s) at sea level
 
 Minimum power/mass: 0.073 hp/lb (120 W/kg)
 
 
 
 
 
 *
 
 
 
 
 | 
 
 |