| 
 | Path: news.nzbot.com!not-for-mail From: Miloch <Miloch_member@newsguy.com>
 Newsgroups: alt.binaries.pictures.aviation
 Subject: Hughes TH-55 Osage
 Date: 26 Apr 2017 07:08:33 -0700
 Organization: NewsGuy - Unlimited Usenet $23.95
 Lines: 103
 Message-ID: <odq9l10fmm@drn.newsguy.com>
 NNTP-Posting-Host: p484353b8d8db19175337e1e402110eb92f8108962a36b2af.newsdawg.com
 User-Agent: Direct Read News 5.60
 X-Received-Bytes: 4722
 X-Received-Body-CRC: 2422018257
 Xref: news.nzbot.com alt.binaries.pictures.aviation:5844
 
 (I flew this as my primary trainer in 1969...the connection between the engine
 and rotor was system of 8 fan belts which you tightened using a cockpit lever.
 The first models had a tail rotor that spun so fast...you couldn't fly it in the
 rain as the tail rotor hitting rain drops would cause it to
 disintigrate!...seriously.  It was so small, only short guys like me got
 assigned to it...taller guys were assigned TH-13s  and 23s)
 
 https://en.wikipedia.org/wiki/Hughes_TH-55_Osage
 
 The Hughes TH-55 Osage was a piston-powered light training helicopter produced
 for the United States Army. It was also produced as the Model 269 family of
 light utility helicopters, some of which were marketed as the Model 300. The
 Model 300C was produced and further developed by Schweizer after 1983.
 
 The Hughes 269 was designed with a fully articulated, three-blade main rotor,
 and a two-blade tail rotor that would remain as distinctive characteristics of
 all its variants. It also has shock absorber-damped, skid-type landing gear. The
 flight controls are directly linked to the swashplate of the helicopter so there
 are no hydraulic systems in the 269. There are generally two sets of controls,
 although this was optional on the civil 269A. For three-seat aircraft, the
 middle collective control stick is removable and a seat cushion can be put in
 its place for the third passenger.
 
 
 Role
 Light utility and trainer helicopter
 
 Manufacturer
 Hughes Helicopters
 
 First flight
 2 October 1956
 
 Primary user
 United States Army
 
 Produced
 
 
 Number built
 2,800
 
 Variants
 Schweizer 300
 
 In 1958, prior to full-time production, Hughes provided five preproduction Model
 269 examples to the U.S. Army for evaluation as a light observation helicopter
 to replace the aging OH-13 Sioux and OH-23 Raven. Designated as the YHO-2HU the
 helicopter was eventually turned down. 9 April 1959, the 269 received
 certification from the FAA and Hughes continued to concentrate on civil
 production. With some design changes, deliveries of the Model 269A version began
 in 1961. By mid-1963 about 20 aircraft were being produced a month and by the
 spring of 1964, 314 had been built.
 
 While the U.S. Army had not found the Model 269 adequate for combat missions, in
 1964 it adopted the Model 269A as its training helicopter to replace the TH-23
 and designated it the TH-55A Osage. 792 TH-55 helicopters would be delivered by
 1969, and it would remain in service as the U.S. Army's primary helicopter
 trainer until it was replaced in 1988 by the UH-1 Huey. At the time of its
 replacement, over 60,000 U.S. Army pilots had trained on TH-55 making it the
 U.S. Army's longest serving training helicopter. In addition to the U.S. Army,
 Hughes delivered TH-55/269/300s to other military customers.
 
 In 1964, Hughes introduced the slightly larger three-seat Model 269B which it
 marketed as the Hughes 300. That same year, the Hughes 269 set an endurance
 record of 101 hours. To set the record, two pilots took turns piloting the
 aircraft and hovered in ground-effect for fueling. To ensure no cheating, eggs
 were attached to the bottom of the skid gear to register any record-ending
 landing.
 
 Between Hughes and Schweizer, and including foreign-licensed production civil
 and military training aircraft, nearly 3,000 copies of the Model 269/300 have
 been built and flown over the last 50 years. That would have been the end of the
 story, but Schweizer continued to develop the model 300 by adding a turbine and
 redesigning the body to create the model 330m, and then further developed the
 dynamic components to take greater advantage of the power of the turbine engine;
 this led to the development of the Model 333.
 
 Specifications (Hughes 269A)
 
 General characteristics
 Crew: two
 Length: 28 ft 11 in (8.8 m)
 Rotor diameter: 25 ft (7.6 m)
 Height: 7 ft 11 in (2.4 m)
 
 Empty weight: 896 lb (406 kg)
 Loaded weight: 1550 lb (703 kg)
 
 
 Performance
 Maximum speed: 78 kts (90 mph)
 Cruise speed: 65 kts (75 mph)
 Range: 203 nm (233 miles)
 Service ceiling: 14,630 ft (4,460 m)
 
 
 
 
 
 
 *
 
 
 | 
 
 |