| 
 | Path: news.nzbot.com!not-for-mail From: Miloch <Miloch_member@newsguy.com>
 Newsgroups: alt.binaries.pictures.aviation
 Subject: Supermarine Seafire
 Date: 23 Dec 2016 15:32:37 -0800
 Organization: NewsGuy - Unlimited Usenet $23.95
 Lines: 113
 Message-ID: <o3kc6l02dho@drn.newsguy.com>
 NNTP-Posting-Host: p9ff6b67346ef29ca6baaae5382569386286bb1bf141289fd.newsdawg.com
 User-Agent: Direct Read News 5.60
 X-Received-Bytes: 5741
 X-Received-Body-CRC: 1628638630
 Xref: news.nzbot.com alt.binaries.pictures.aviation:5199
 
 https://en.wikipedia.org/wiki/Supermarine_Seafire
 
 The Supermarine Seafire was a naval version of the Supermarine Spitfire adapted
 for operation from aircraft carriers. The name Seafire was arrived at by
 abbreviating the longer name Sea Spitfire.
 
 The Admiralty first showed an interest in the idea of a carrier-borne Spitfire
 in May 1938 when, during a meeting with Richard Fairey (of Fairey Aviation),
 Fairey proposed that his company could design and build such an aircraft. The
 idea met with a negative response and the matter was dropped. As a result, the
 Fleet Air Arm (FAA), at that point still part of the Royal Air Force, was forced
 into having to order Blackburn Rocs and Gloster Sea Gladiators, both of which
 proved to be woefully inadequate. Upon the outbreak of the Second World War,
 many of the aircraft operated by the FAA were considered to be obsolete in
 comparison to Germany's land-based fighters; thus the need for more capable
 aircraft was readily apparent. As the Hawker Hurricane had quickly proven to be
 adaptable to carrier-based operations, there was considerable interest in
 navalising the Spitfire as well.
 
 The main structural change was made to the lower rear fuselage which
 incorporated an A-frame style arrestor hook and strengthened lower longerons. It
 was soon discovered that the fuselage, especially around hatches, was too weak
 for carrier operations. In an attempt to alleviate this condition, reinforcing
 strips were riveted around hatch openings and along the main fuselage longerons.
 A further 118 Seafire Mk Ib's incorporating the fuselage reinforcements were
 modified from Spitfire Vbs by Cunliffe-Owen at Eastleigh and Air Training
 Service. These aircraft were equipped with Naval HF radio equipment and IFF
 equipment as well as a Type 72 homing beacon. In these and all subsequent
 Seafires the instruments were re-calibrated to read kn and nmi rather than mph
 and mi. The fixed armament was the same as that of the Spitfire Vb; two 20 mm
 (.79 in) Hispano Mk II cannon with 60 rpg fed from a "drum" magazine and four
 .303 in (7.7 mm) Browning machine guns with 350 rpg. Provision was also made to
 carry a 30 gal (136 l) "slipper" fuel tank under the fuselage.
 
 
 Role
 Carrier-based fighter
 
 Manufacturer
 Supermarine
 
 First flight
 7 January 1942
 
 Primary users
 Royal Navy
 French Navy
 Irish Air Corps
 Royal Canadian Navy
 
 Number built
 2,334
 
 Developed from
 Supermarine Spitfire
 
 The Seafire II outperformed the A6M5 (Zero) at low altitudes when the two types
 were tested against each other in World War II. Contemporary Allied aircraft
 specifically designed for carrier use, such as the Grumman F6F Hellcat and the
 Vought F4U Corsair, were considerably larger and more robust and generally more
 powerful. The more powerful Seafire III enjoyed better climb rates and
 acceleration than these other fighters. Late-war Seafire models equipped with
 Griffon engines enjoyed a considerable increase of performance compared to their
 Merlin-engined predecessors. The Griffon powered Seafires had some serious
 faults; the main problem was a result of the increased power yielded by the
 Griffon engine; the increase in torque meant the pilot had to continuously
 correct the flight of the aircraft (to prevent the frame of the aircraft
 rotating in the other direction to that of the propeller). This was a huge
 problem when attempting to take off and land from an aircraft carrier. The
 torque also affected the lift of the right wing (the Griffon engines rotated
 anti-clockwise) which would lose lift and even stall at reasonable speeds. The
 increased weight of the engine meant that the take-off had to be longer and
 proved very dangerous from most British carriers. The increased weight of the
 engine further affected the centre of gravity that Mitchell had concentrated on
 so carefully in the original Spitfire. As a result, the handling of the aircraft
 suffered. Eventually most of these problems were fixed in Seafire 47 when the 6
 bladed contra-rotating propeller was adopted.
 
 During 1944, Seafires were used for air cover in support of several aerial
 bombing missions against the German battleship Tirpitz. In June 1944, multiple
 Seafire squadrons were used during the Normandy landings for the purpose of
 locating in-land targets for naval gunnery batteries to attack; during this
 operation, these aircraft had been placed under RAF control and were operated
 from shore bases, these were returned to FAA control in July 1944. In August
 1944, Seafires were used to support Allied ground forces during Operation
 Dragoon in Southern France.
 
 Specifications (LF Mk III)
 
 General characteristics
 Crew: one
 
 Wingspan: 36 ft 10 in (11.22 m)
 Height: 11 ft 5 in (3.48 m)
 
 Empty weight: 6,204 lb (2,814 kg)
 Max. takeoff weight: 7,640 lb (3,466 kg)
 
 
 Performance
 Maximum speed: 359 mph (578 km/h) at 5,100 ft (1,554 m)
 Cruise speed: 218 mph (351 km/h)
 Range: 513 mi (825 km)
 Service ceiling: 32,000 ft (9,754 m)
 Rate of climb: 1.9 min to 5,000 ft (1,525 m)
 
 
 
 
 
 
 *
 
 
 | 
 
 |