Path: news.nzbot.com!not-for-mail
From: Miloch <Miloch_member@newsguy.com>
Newsgroups: alt.binaries.pictures.aviation
Subject: Curtiss SBC Helldiver
Date: 11 Jun 2016 17:26:31 -0700
Organization: NewsGuy - Unlimited Usenet $23.95
Lines: 67
Message-ID: <njia7n09ri@drn.newsguy.com>
NNTP-Posting-Host: pe30a07e8975bab60cc5f8a30f392d5d18fac45ba695fae27.newsdawg.com
User-Agent: Direct Read News 5.60
X-Received-Body-CRC: 823800413
X-Received-Bytes: 3580
Xref: news.nzbot.com alt.binaries.pictures.aviation:3782
http://www.aviastar.org/air/usa/curtiss_sbc.php
Requiring a new two-seat fighter, the US Navy ordered a prototype from Curtiss
in 1932 under the designation XF12C-1. This Curtiss Model 73 flew for the first
time during 1933, in the form of a two-seat parasol-wing monoplane with
retractable landing gear powered by a 466kW Wright R-1510-92 Whirlwind 14
engine. When, at the end of the year, it was decided to use this aircraft in a
scout capacity, its designation was changed to XS4C-1. Following yet another
change of heart, its role became that of a scout-bomber in January 1934 and a
Wright R-1820 Cyclone engine was installed. Extensive trials followed, and
during a dive test in September 1934 there was structural failure of the wing
and the XSBC-1, as it had been designated, was damaged extensively.
The parasol wing was clearly unsuitable for the dive-bombing requirement, and a
new prototype was ordered as the XSBC-2 (Model 77), this having biplane wings
and a 522kW Wright R-1510-12 Whirlwind 14 engine. When, in March 1936, this
engine was replaced by a 522kW Pratt & Whitney R-1535-82 Twin Wasp Junior
engine, and the designation changed yet again to XSBC-3. The production SBC-3
(Model 77A), of which the US Navy ordered 83 on 29 August 1936, was generally
similar and the first deliveries, to Navy Squadron VS-5, were made on 17 July
1937.
A late production SBC-3 was used as the prototype of an improved XSBC-4 (Model
77B) with a more powerful Wright R-1820-22 engine. Following an initial contract
of 5 January 1938, the first of 174 production examples of the SBC-4 for the US
Navy was delivered in March 1939. Because of the desperate situation in Europe
in early 1940, the US Navy diverted 50 of its SBC-4s to France but these were
received too late to be used in combat. Five were recovered for use by the RAF,
and these were issued to RAF Little Rissington for allocation as ground trainers
under the designation Cleveland. The US Navy's deficiency of 50 aircraft was
made good by delivery of 50 out of the 90 aircraft which had been in production
for France. Retaining the SBC-4 designation, these differed from standard in
having self-sealing fuel tanks.
By the time the USA became involved in World War II, the SBC-3s had become
obsolescent, but SBC-4s were then in service with US Navy Squadrons VB-8 and
VS-8 on board the USS Hornet and with US Marine Squadron VMO-151.
Specification
MODEL Curtiss SBC-4
ENGINE 1 x 671kW Wright R-1820-34 Cyclone 9 radial piston engine
WEIGHTS
Take-off weight 3211 kg 7079 lb
Empty weight 2065 kg 4553 lb
DIMENSIONS
Wingspan 10.36 m 34 ft 0 in
Length 8.57 m 28 ft 1 in
Height 3.17 m 10 ft 5 in
Wing area 29.45 m2 317.00 sq ft
PERFORMANCE
Max. speed 377 km/h 234 mph
Cruise speed 282 km/h 175 mph
Ceiling 7315 m 24000 ft
Range w/max.payload 652 km 405 miles
ARMAMENT 2 x 7.62mm machine-guns, 1 x 227kg bomb
*
|
|