Path: news.nzbot.com!spool1.sonic-news.com!news-out.sonic-news.com!not.news-service.com!not.alt.net!not.highwinds-media.com!s03-b08.iad!num02.iad!npeer02.iad.highwinds-media.com!news.highwinds-media.com!feed-me.highwinds-media.com!post02.iad.highwinds-media.com!newsfe17.iad.POSTED!7564ea0f!not-for-mail
From: sassy <sassysan@charter.net>
Newsgroups: alt.binaries.crafts.pictures
Subject: reply for Herb
Message-ID: <ack9u5h1ohnbj3tuehts8c97087hmair7d@4ax.com>
References: <rsg9u5phjvtkqroddf2amp7h28346jsmaj@4ax.com> <DU3Fn.248418$Bs1.227734@en-nntp-01.dc1.easynews.com>
X-Newsreader: Forte Agent 6.00/32.1186
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 51
NNTP-Posting-Host: iokjnjlfdldhbbahjeibeakjejabfbko
X-Complaints-To: abuse@charter.net
X-Trace: lohomekffeimhpgdphkbdkgdnpdbolibafaapkfhbjjfeoneiokjnjlfdldhbbahhibjcfdighkelfaclkdejbkcgpblimkikgpecckinfcopnaapcgdcdjfabecbincbgjklipccefckbgb
NNTP-Posting-Date: Sat, 08 May 2010 02:51:20 UTC
Date: Fri, 07 May 2010 21:51:09 -0500
Xref: news.nzbot.com alt.binaries.crafts.pictures:14229
X-Received-Date: Sat, 08 May 2010 02:51:20 UTC (s03-b08.iad)
On Fri, 07 May 2010 19:21:23 -0700, Herb <Herb@the.herb.garden> wrote:
>sassy wrote:
>> This is for the ladies in the Building blocks playgroup. I need the
>> picture to be about 2X3 so I can put words above and below.
>>
>> Thank you for your help!
>> Sassy
>
>Haven't you asked for this three times already? I see that you got
>some responses - if you didn't like what you got, why don't you say
>WHY? It really doesn't help to just keep asking, saying "it wasn't so
>good" or something like that. And your image is almost square, so
>without stretching it, it can never by 2x3 or even what you probably
>meant, 3x2 (width comes first).
>
>Anywhere, here's a quick pass at it, without any modification to your
>original graphic. If you don't like it, please say EXACTLY why not.
>It may or may not be fixable.
>
> - Herb
Thank you Herb!
I am sorry, and I thank you for being considerate and explaining
proper etiquette instead of just flaming me.
yes, I did send this three times. Again, I am sorry I did not do it
correctly and explain what was wrong. I am still quite new to
embroidery and to explain what I think is wrong may be incorrectly
stated, but here goes.
One of the ones I received had way too many jump stitches. The
stitches were so small they were sinking into just plain old cotton.
(I was testing the stitches).
The next one was way too dense in the area of the ladder on the truck
and it did not look like a ladder.
This is out of my league. My supervisor found out I had an embroidery
machine and thought she could just had me a picture and be able to put
it onto some shirts. Now it is 5 aprons and 8 t-shirts. She wants
them by Tuesday.
Please accept my apology....Now I know what I should do. Actually, I
am hoping not to have to do this again for awhile. I work full-time
and have 2 small children at home, so time is precious to me.
Thanks again,
Sassy
|
|