| Re: pe-design card reader, still confused |
EasyNews, UseNet made Ea .. |
| surprise (surprise_nospam@new.com) |
2008/10/06 09:45 |
Hi! Here are instructions for version 7. They are the same as for ver
6.
PE Design Ver. 7 Install Directions
1. Do Setup from CD, do not start with the automatic startup.
2. Install from CD with the setup launcher
3. Do not reboot
4. Open the crack folder on CD and Copy all cracks in the crack
folder and
5. Paste to C:\Program Files\brother\PE Design ver. 7 (Make sure
you open ver. 7 before you paste). Then it will ask you if you want to
replace the files, say yes.
6. It will reboot
7. Start Program
I hope this helps.
I have been in PE design quite a few years now.
Surprise
wrote:
>On Sun, 05 Oct 2008 20:33:16 GMT, bev572 <bev572@cox.net> wrote:
>
>>Thanks, I didnt get instructions, i still dont know how to do what you said. there is no istall folder,
>> just a set up and when i try to add it there, it just starts the install and still doesnt add the files.
>> I am new at this (in case you cant tell LOL) please explain to me how to do this. thanks in advance bev
>
>Ok first of all i do not have the programm installed but i have the cd with the files
>on it.
>I attached 2 pictures and what i was talking about are the files in the Crack folder.
>I do talk about a FIXED program with a CRACK and i do not know if you have a
>original PE-D 6. I also do not know if you have just one single install file or a ISO
>file of a cd like i have.
>I still think you miss the files CardIO.dll, Embedit.exe and Embmake.exe and i think
>when you have those files and put them where it is needed according to
>iso-pe.design.v6.rtf then the program should work just fine.
|
|
|