| 
 | Path: news.nzbot.com!not-for-mail From: Miloch <Miloch_member@newsguy.com>
 Newsgroups: alt.binaries.pictures.aviation
 Subject: Salmson 2
 Date: 17 Mar 2017 07:44:25 -0700
 Organization: NewsGuy - Unlimited Usenet $23.95
 Lines: 90
 Message-ID: <oagso901i1j@drn.newsguy.com>
 NNTP-Posting-Host: pde0366dd5465a5de4437fa2864f3e3c2e5292c6400d359ea.newsdawg.com
 User-Agent: Direct Read News 5.60
 X-Received-Bytes: 4075
 X-Received-Body-CRC: 2146968116
 Xref: news.nzbot.com alt.binaries.pictures.aviation:5604
 
 https://en.wikipedia.org/wiki/Salmson_2
 
 The Salmson 2, (given the military designation Salmson 2 A2) was a French
 biplane reconnaissance aircraft made by Salmson. It was developed to a 1916
 requirement. Along with the Breguet 14, it was the main reconnaissance aircraft
 in use with the French army and the American Expeditionary Force's aviation
 units in 1918. At the end of the First World War, one-third of French
 reconnaissance aircraft were Salmson 2s.
 
 During the First World War, the Salmson factory built aircraft engines,
 generally 9- and later 18-cylinder water-cooled radial engines developed from
 
 designs ever used for military aircraft. The company's first entry into aircraft
 design came with the Salmson-Moineau S.M. 1, an unusual three-seat
 reconnaissance biplane with twin airscrews gear-driven from a single Salmson
 engine in the nose of the fuselage. These aircraft, of which 155 were built,
 were not especially successful.
 
 
 and Dorand A.R. reconnaissance aircraft in the A2 (tactical reconnaissance)
 
 an original design, owed more to the Sopwith than to the earlier
 Salmson-Moineau. The aircraft was of conventional construction with a two-bay
 biplane configuration, powered by the company's own Salmson 9Z water-cooled
 radial engine of 230 bhp. Some minor control problems were quickly resolved in
 early testing, but the main defect of the Salmson 2, shared with the
 contemporary Airco DH.4, was that the pilot and gunner were seated rather far
 apart, making communication difficult. Production was ordered after trials on 29
 April 1917, and deliveries were underway by October of that year. Around 3,200
 Salmson 2s were built in France, 2,200 by Salmson and the remainder by the
 
 D.2 dual control advanced training aircraft.
 
 
 Role
 Reconnaissance biplane
 
 Manufacturer
 Salmson
 
 First flight
 1917
 
 Number built
 3,200
 
 In addition to its service with the French army, the Salmson 2 served during the
 First World War with United States air units. Some 700 were purchased, and were
 generally successful.
 
 Post-war, Salmson 2s were purchased by Czechoslovakia, and remained in service
 until 1924. Others were transferred to Poland, but were withdrawn by 1920, and
 replaced by Bristol F.2Bs. Japan undertook license production as the "Army Type
 Otsu 1", also known as the Kawasaki-Salmson. The number of aircraft built in
 Japan is unclear: 300 were built by Kawasaki, and the same quantity by the
 Imperial Japanese Army's Tokorozawa supply depot, although the total number of
 aircraft produced may have been as high as 1,000.
 
 Specifications
 
 General characteristics
 Crew: Two, pilot and gunner
 
 
 Height: 2.9 m (9 ft 6 in)
 
 Empty weight: 780 kg (1,716 lb)
 Loaded weight: 1,290 kg (2,838 lb)
 
 
 Performance
 Maximum speed: 188 km/h (101 knots, 116 mph) at sea level
 Range: 500 km (270 nm, 310 mi)
 Service ceiling: 6,250 m (20,500 ft)
 
 
 Time to altitude: 2,000 m (6,562 ft) in 7 minutes 13 seconds
 
 Armament
 
 Guns:
 
 
 
 
 
 
 
 *
 
 
 | 
 
 |