Survivor 18 <happy2b@home.net> wrote:
>Please explain to me what these files are and why the change from just
>plain "hus" files. How does one open them easily without jumping
>through hoops. Always willing to learn something new.
>
>TIA Nana
Lost me!!!
Now I going to give up!
Executable files in a sewing group, mad!
I posted my zip help to get friendly hellos!!
@@@@@@@@@
Sew the seam below where the zipper is going to be installed. The
5/8-inch seam allowance is plenty. Leave a finger's width of space
above the good stitching, and baste the zipper opening closed along
the seam allowance. Press the seam open. Starting at the bottom of
the
zipper, line up the metal stop just above the good seam, and at the
edge of the 5/8-inch seam. You will be stitching only through the
seam allowance, so get the rest of the garment out of the way. Baste
the right-hand side of the zipper in place. Again, stitching only
through the seam allowance, fold the zipper under. and using good
stitching, sew right next to the fold, from bottom to top. You're
still working on one side of the zipper. If the zipper is open,
close it now, and turn the garment to the right side. Sew the
remaining side of the zipper in place, about 3/8 inch away from the
seam. The opening you left at the top of the seam is your guide for
where to turn the corner to finish the bottom. Remove the basting.
@@@@@@@@@
Why do I bother, Insane you are~~~~~~~~~~~~~~~
|
|