Path: news.nzbot.com!spool1.sonic-news.com!news-out.sonic-news.com!not.news-service.com!not.alt.net!not.highwinds-media.com!dr3!sd14!feeder.news-service.com!feeder.news-service.com!newspump.sol.net!198.186.194.249.MISMATCH!transit3.readnews.com!news-out.readnews.com!news-xxxfer.readnews.com!216.40.28.145.MISMATCH!novia!nx02.iad01.newshosting.com!209.197.12.242.MISMATCH!nx01.iad01.newshosting.com!newshosting.com!69.16.185.21.MISMATCH!npeer03.iad.highwinds-media.com!news.highwinds-media.com!feed-me.highwinds-media.com!border1.nntp.dca.giganews.com!border2.nntp.dca.giganews.com!nntp.giganews.com!news-in-01.newsfeed.easynews.com!easynews!core-easynews-01!easynews.com!en-nntp-05.dc1.easynews.com.POSTED!not-for-mail
X-Newsreader: Forte Agent 1.93/32.576 English (0rstrelehan)
Newsgroups: alt.binaries.crafts.pictures
Subject: Re: Help with Hus3D EmbSyst Please......See Inside
Followup-To: alt.binaries.crafts.pictures
Summary: accept no forgeries- Path ends with--->dc1.easynews.com.POSTED!not-for-mail
Organization: ABCP p0stAL
References: <HQf9n.31972$BV.1654@newsfe07.iad> <QZl9n.185030$H15.60858@en-nntp-02.dc1.easynews.com> <oMZ9n.20867$Fe4.3094@newsfe21.iad>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Lines: 76
Message-ID: <cexan.231222$N07.121521@en-nntp-05.dc1.easynews.com>
X-Complaints-To: abuse@easynews.com
X-Complaints-Info: Please be sure to forward a copy of ALL headers otherwise we will be unable to process your complaint properly.
Date: Thu, 04 Feb 2010 20:23:05 +1000
X-Original-Bytes: 3456
Xref: news.nzbot.com alt.binaries.crafts.pictures:12604
"StitchingDaddy" <fishingfool775@comcast.net>wrote:
>
>news:QZl9n.185030$H15.60858@en-nntp-02.dc1.easynews.com...
>> "StitchingDaddy" <fishingfool775@comcast.net>wrote:
>>>I have tried to install and patch but every time I try to patch using
>>>install, it tries to run and I get and error message. It installs the Hasp
>>>files into C:\windows\system32 but the program can't find them. I have
>>>tried
>>>to install on two different systems, WinXP Home and WinME. Any Help would
>>>be
>>>great.
>>>It's not easy being an ol' fart.
>>>
>>
>> G'day SD...
>> Fire up your Agent and locate this thread.
>> ::Subject: Re: 3D Husq install instructions not clear
>> Read this post of mine in that thread.
>> ::MiD:<jaM5n.91712$oC1.77161@en-nntp-01.dc1.easynews.com>
>>
>> The same advice applies in your situation.
>> You might include in any response the error message
>> the patch install is generating?
>>
>> cheers
/snip
>
>This is what is shown when I try to run the install for the crack:
>
>Stop driver haspflt
>ERROR: Can't stop driver - not started? - error 1062
>Remove driver haspflt
>1 file(s) copied.
>Install file C:\WINDOWS\System32\Drivers\haspflt.sys for driver haspflt
>SUCCESS
>-start (old value) =Manual
>-start (new value) =Automatic
>Start driver haspflt
>Opened service
>ERROR: Can't start driver - error 2
>Press any key to continue...
>
>That is word for word.
>I did check that thread already and I am doing what it says to do but still
>nothing
>
The instructions I posted are for a file set of Hus 3D
that works, been proven here in this NG a number of
times.. since 2004/5. What you have I have no idea sooo
please do two things for us?
1.Cut n paste into the body of your response the
instructions for the file set you have.
2. Go to the <setup.exe> for your file set of Hus3D.
Using a single Right click of the mouse on the
highlighted filename, bring up the "action" dialog.
Select "Properties", and from the next screen,
"Version".
Copy that number down and include that too in your
response.
>Any help..TIA Dan
>
Ok, Dan.. this is being worked on, and not just by
myself, on my Pat Malone. Whatever eventuates you will
get a response.. this may take a while, like a few
days...Ok?
cheers
--
hopper
|
| Follow-ups: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
|